Dolls House - Lights & Fires Controller

This is a Lighting Controller for a dolls house - this one has been specifically tailored for the featured Georgian House. It contains the power supply to power the lights and fires and a controller to allow the lights and fires to be independently switched on and off. It connects to the house by means of a 25 way socket which attaches to a plug at the rear of the house. Each light and fire in the house is independently wired to the plug.

The Fires always flicker when they are on, and each light can be individually set to flicker or not flicker, when on. The current setup can be saved internally so that it will remember the states of all the lights and fires and will restore the same state the next time it is switched on. All the fires and the lights which are set to flicker, will flicker independently of each other.

Buttons L1 to L9 control the nine lights in the house, the button positions correspond to the positions of the lights in the house. Press to turn on, press again to turn off.

Buttons F1 to F6 control the six fires in the house, the button positions correspond to the positions of the fires in the house. Press to turn on, press again to turn off.

The 'ALL' button will switch all the lights and fires on and off together.

The 'Flicker' button, will cause the selected light to be on flickering if it is pressed while the L1 to L9 button is pressed to turn that light on. Flickering will be cancelled for that light if the 'Flicker' button is again pressed when the L1 to L9 button is pressed to turn that light off.

The 'Save' button, when it is pressed with the 'Flicker' button also pressed, will save the current state of the lights and fires so that the same state will be restored the next time the controller is switched on.

If you would like me to supply a lighting system for your house, please click Here or click the Enquiry button at the top of the page.